ZLTECH Nema17 0.5/0.7Nm 18V-36V e kenyellelitsoeng mohato oa servo e nang le encoder

ZLTECH Nema17 0.5/0.7Nm 18V-36V e kopantsoeng ea mohato oa servo e nang le encoder Setšoantšo se bontšitsoeng

Tlhaloso e Khutšoanyane:

Kemiso

ZLIS42 ke enjene ea 2 phase hybrid step-servo e nang le drive e kopaneng ea dijithale e sebetsang hantle haholo.Tsamaiso e na le sebopeho se bonolo le kopanyo e phahameng.Letoto lena la li-motor tse koaletsoeng li sebelisa chip ea DSP ea morao-rao e inehetseng ea 32-bit bakeng sa taolo ea makoloi, 'me e sebelisa theknoloji e tsoetseng pele ea taolo ea filthara ea dijithale, theknoloji ea khatello ea resonance vibration le thekenoloji e nepahetseng ea taolo ea hajoale ho nolofalletsa motor ea mekhahlelo e' meli hore e fihlelle. ts'ebetso e nepahetseng le e tsitsitseng.Letoto lena la li-motor tse koaletsoeng tse koaletsoeng li na le litšobotsi tsa tlhahiso e kholo ea torque, lerata le tlase, ho sisinyeha ho tlase, le mocheso o tlase, tse loketseng ka ho khetheha lisebelisoa tsa elektronike, ts'ebetso ea laser, lisebelisoa tsa bongaka le tse nyenyane tsa ho laola linomoro.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likaroloana

1. Taolo e feletseng e koetsoeng ea loop, ha ho tahlehelo ea mohato.
2. Ho sisinyeha ho tlase le lerata.
3. Maximum 512 microstep subdivision, bonyane ba unit 2.
4. Matla a kenyang: 18V-36VDC.
5. Likou tse 3 tse arohaneng tsa ho kenya liphatlalatso: 3.3-24VDC.
6. Boema-kepe ba 1 bo ikemetseng: tlhahiso ea alamo, OC.
7. Taolo ea hona joale e boreleli ebile e nepahetse, 'me motlakase o na le moloko o fokolang oa mocheso.
8. Khetho ea switjha ea 4 DIP, qeto ea mehato e 16.
9. Ka over-voltage, over-current, out of tolerance sireletsa mosebetsi joalo-joalo.
10. Ka encoder ea makenete ea terata ea 1000 e hahelletsoeng ka hare, e fana ka maikutlo a nako ea nnete ea boemo ba ho tsamaisa makoloi.

Molemo

Molumo o monyenyane, ts'ebetso ea theko e phahameng, tekanyo e tlaase ea ho hlōleha, ntle le ho tsamaisana le motlakase le mokhanni oa koloi, mefuta e sa tšoaneng ea ho laola (ho ikhethela) pulse le CAN bese, e bonolo ho e sebelisa, moralo oa tsamaiso le tlhokomelo e loketseng, e kholo |ho fokotsa nako ea ntlafatso ea lihlahisoa.
Enjene ea Stepper e ka fetola lets'oao la motlakase hore e be phallo ea li-angular kapa linear.Lethathamong la matla a lekantsoeng, lebelo la enjene le ipapisitse feela le maqhubu le palo ea molumo oa lets'oao la pulse, 'me ha le angoe ke phetoho ea mojaro, hammoho le litšobotsi tsa phoso e nyane e ntseng e eketseha ea enjene ea stepper, e etsang hore ho be bonolo. ho laola lebelo, boemo le libaka tse ling ka mochini oa stepper.Stepper motor e arotsoe ka mefuta e meraro, enjene ea hybrid stepper e sebelisoa haholo hajoale.

Mekhahlelo

Pulse	2 Phase E TLOTSENG LOOP
Ntho	ZLIS42-05	ZLIS42-07
Shaft	Shaft e le 'ngoe	Shaft e le 'ngoe
Boholo	Nema17	Nema17
kgato angle	1.8°	1.8°
Matla a kenang (VDC)	18-36	18-36
Tlhōrō ea hona joale ea tlhahiso(A)	1.2	1.2
Maqhubu a lets'oao la mohato(Hz)	200k	200k
Laola tlhahiso ea lets'oao la hajoale(mA)	10	10
Over-voltage protection(VDC)	29	29
Matla a lets'oao la ho kenya (VDC)	5	5
bophara ba shaft(mm)	5/8	5/8
bolelele ba shaft(mm)	24	24
Ho Tšoara Torque(Nm)	0.5	0.7
Lebelo(RPM)	2500	2500
Encoder	Magnetic ea terata ea 2500	Magnetic ea terata ea 2500
Insulation resistance(MΩ)	100	100
Mocheso oa tšebeletso(℃)	0-50	0-50
Max.mongobo o phelang	90% RH	90% RH
Thempereichara ea polokelo(℃)	-10-70	-10-70
Ho thothomela	10 ~ 55Hz / 0.15mm	10 ~ 55Hz / 0.15mm
Boima(g)	430	430
Bolelele ba makoloi(mm)	70	82
Bolelele ba makoloi kaofela(mm)	94	106